DIY treatment planning
DIY Termite Trenching: Planning a Soil Treatment Around Your Home
Map the foundation, check the actual product label, and work out the full job before buying a termiticide or digging.
Short Answer
Termite trenching places a labeled liquid termiticide into soil along a foundation to create a treated zone against subterranean termites. A homeowner can measure the perimeter, map obstacles, check records, and prepare a material estimate. Whether you can perform the pesticide treatment yourself depends on the product’s applicator restrictions, state rules, and the construction you need to treat.
An accessible strip of soil outside the house is only one part of the decision. Attached concrete, crawl-space piers, deep foundations, drains, and inaccessible entry routes can change the scope. Resolve those details before digging; an exterior trench alone does not establish that the entire home is protected.
Choosing a method first? Compare bait stations and liquid soil treatment. This guide focuses on planning a soil-treatment project rather than choosing between all termite methods.
What Trenching Does—and What a Perimeter Spray Does Differently
A soil-treatment plan follows the places subterranean termites can approach the building. Trenching exposes soil next to the foundation so the labeled treatment can be delivered there. Some construction requires additional methods, such as rodding or treatment beneath adjoining concrete.
A general insect spray along siding or across the surface of a flower bed is a different application. It may have directions for ants or other pests without providing the soil treatment required for termites. Check the termite soil-treatment section of the label, not just a pest list on the front of the bottle.
NC State Extension explains why spraying visible termites or accessible surfaces does not stop a hidden infestation. Trenching also does not treat a drywood colony living entirely inside above-ground wood; start with the termite-type comparison if the evidence is uncertain.
1. Check Whether the Product Allows Your Use
Before comparing prices, find the EPA registration number and read the complete label for the exact product and formulation. Check who may buy, store, and apply it; the permitted site and termite use; protective equipment; water restrictions; and application equipment. Confirm state requirements with your state’s pesticide or structural pest-control regulator. A retailer accepting an order does not settle those questions.
Taurus SC is not an automatic homeowner option. Both labels linked from the manufacturer’s product page when reviewed for this guide limit sale, use, and storage to state-licensed or registered individuals or firms. Verify the labeling on the container and your state’s requirements. Do not use a retail DIY video as permission to apply a product.
The manufacturer’s Taurus SC page links its labels. Our Taurus SC vs. Termidor comparison addresses the products; this planning guide does not recommend either one for an unqualified applicator.
If the label does not authorize your intended user and application, choose a different permitted approach or have that treatment performed by someone qualified. Keep the label with your project notes so the plan refers to one specific product.
2. Make a Foundation Map Before You Dig
Sketch the house from above. Give each wall a letter, measure its length, and note each change in access or construction. Record the date, the measuring method, and anything you cannot determine. Do not treat an estimate of foundation depth as a measured fact.
- Mark accessible soil against the foundation. Separate it from paths, patios, driveways, decks, and enclosed porches.
- Mark water and services. Note wells, cisterns, drains, sump discharge, irrigation, downspouts, and known utility routes. Identify buried services before excavation, including private lines that may need separate locating.
- Mark construction changes. Include additions, garages, slab sections, basement walls, and safely visible crawl-space supports.
- Mark termite evidence and previous work. Photograph tubes in place and note old treatment holes, installed stations, and areas identified in earlier reports.
- Circle unresolved sections. A covered edge or unknown footing is a planning question, not an invitation to guess or drill.

3. Identify the Sections That Change the Job
Concrete against the house
A patio or walkway can cover the soil next to the foundation. A trench around its outside edge is not automatically equivalent to treatment at the foundation. Resolve the required access and method before including that section in the plan.
Crawl spaces and piers
A raised home may have interior foundation edges and supports that matter to treatment. Measuring only the outside walls can omit those areas. Use the crawl-space guide for construction and access questions.
Slabs, garages, and porches
Concealed entry routes may remain under concrete. Use the slab-foundation guide to understand why an outside trench may not address all routes. Drilling requires a separate construction assessment.
Water, slopes, and deep walls
Water features, drainage systems, soil condition, and foundation depth affect whether and how treatment can be made. Find the corresponding label section; do not copy a shallow-foundation recipe to a basement wall.
Compare your map with any existing treatment diagram or service agreement. If the house already has a treated zone or bait program, determine how digging would affect it before disturbing soil or moving stations.
4. Estimate the Work With the Correct Label Units
Start with linear feet of foundation, not the home’s floor area. A simple rectangular footprint that is 40 feet by 30 feet has a 140-foot outside perimeter: 40 + 30 + 40 + 30. That number is a measurement example, not a treatment specification. Actual homes can have recessed walls, additions, and interior sections.
Make a separate estimate for every section with different treatment requirements. Record:
- Section letter, measured length, and construction type.
- The exact label section and application method that apply.
- Any depth or other factor used by that label’s volume calculation.
- The required volume of finished solution for that section.
- Unresolved access, water, or application restrictions.
If the applicable label gives finished gallons per 10 linear feet at a specified depth, the length part of the calculation is length ÷ 10 × the labeled volume. Use that expression only within the conditions stated on the label. If the rate also depends on depth, that factor must be included as directed. A perimeter total cannot stand in for an unknown footing depth.
Finished solution and concentrate are different quantities. First establish the finished volume and the authorized application. Then obtain concentrate requirements from the chosen product’s own mixing directions. Keep the units separate in your notes. Do not borrow a dilution, trench size, or application rate from another brand.
Add equipment, protective equipment, delivery, and any specialist access work to the budget. For the broader price comparison, see termite treatment costs.
5. Prepare the Equipment and Site
For planning, you need a tape measure, paper or a saved sketch, a camera, and the current label. Before any excavation, arrange the necessary utility locating and confirm access to the work area.
For an authorized treatment, build the equipment list from the label: suitable digging and application tools, dedicated measuring equipment, required protective equipment, and a way to measure delivered volume. Do not assume a small garden sprayer can supply the required application. Have the product’s storage, spill, cleanup, and disposal instructions available before opening it.
Move loose items that block safely accessible exterior inspection, while preserving evidence and existing protection. Correct leaks and drainage problems as ordinary maintenance. Those repairs are useful whether or not you proceed with a pesticide; they do not demonstrate that termites have been eliminated.
If the project started with insects found in a mulch bed, read what to do about termites in mulch before deciding on soil treatment. A landscape find alone does not establish a building infestation or the need to trench.
What Happens During a Labeled Soil Treatment?
The general sequence is to establish the authorized treatment scope, expose the required soil, deliver the specified finished solution to the specified locations, and handle replacement soil as the label directs. The precise trench dimensions, treatment depth, rodding requirements, backfill procedure, and reentry conditions come from that product’s directions and the foundation involved.
Do not skip a required section because it is awkward to reach. Document a gap and resolve the method before treating around it. A partly treated perimeter should be recorded as partly treated, rather than described as complete protection.
Stop when the plan becomes uncertain. Unlocated services, unknown foundation details, inaccessible soil, drainage risks, or an application beyond your qualifications need resolution before digging or applying pesticide. EPA and university extension guidance emphasize the complexity of structural soil treatments.
Can You Treat for Termites Without Trenching?
Sometimes a different method is appropriate. A labeled bait system follows a monitoring and servicing plan rather than a trenching plan. Other liquid application techniques may exist for particular construction, but they require their own directions and equipment. Simply spraying a visible soil strip is not a universal substitute.
For a homeowner-managed bait option, use our DIY bait-station guide. Check the system’s actual purpose and service requirements; a detection stake and a colony-control bait are not interchangeable.
After Treatment: Keep a Record and Protect the Work
Save the label, registration number, date, weather and soil observations, section map, and the actual areas and quantities treated. Record areas left unresolved. Keep people and animals out for the interval and conditions required by the product label.
Later landscaping, utility work, additions, and changes in drainage may disturb protection. Keep those changes in the same record. Existing tubes or damaged wood do not disappear after treatment, and the disappearance of visible insects does not establish control throughout a structure. Use the post-treatment follow-up guide to document changes.
Your Next Step
Draw the perimeter map and mark every unresolved section first. Then check a specific product’s label and your eligibility to use it. Calculate materials only after the foundation, application method, and required scope are clear. If those checks do not support the project, compare a permitted bait option or arrange the unresolved work with a qualified applicator.
Sources
- U.S. EPA — Termites: How to Identify and Control Them
- NC State Extension — Monitoring and Management of Eastern Subterranean Termites
- UC IPM — Subterranean and Other Termites
- Rutgers Extension — Termite Prevention and Control
- Control Solutions — Taurus SC product page and linked labels
Sources and linked product restrictions reviewed October 10, 2026. Always use the labeling accompanying the product and applicable state requirements.
